Large XY Plotter
Overview
This is a simple belt driven XY plotter using sliding elements for both X and Y axes. It can move relatively fast, 300-400 IPM (130-170 mm/s). The Y axes sliding elements are driven independently which allows larger X spans without loss of accuracy.
Specifications
- Axis travel: X17" / Y11".
- Assembly time: approx 2-3 hrs.
- Accuracy: ~1/32"
Issues
- Original version has accuracy issues due to backlash in jaw motor coupling.
- New and improved version has pulley directly on the motor, eliminating backlash
Version Info
Source Files
Project Kits
- Structural Kit
- Linear Motion Kit
- Electronics & Motors Kit
- Toolhead
- 24" angle lengths
- XL540 belts
- sliding-element-3.5
- belt-clamp
In Action
Whatever happened, Happened
A larger version of the plotter with work area 17"x17" was used for Daniel Palacios' art project: http://danielpalacios.info/en/whatever_happened
A test pattern
Toolheads
Components and Parts
Only mechanical components are listed, no skin or electronics.
qty | components |
---|
qty | parts |
---|
qty | custom parts |
---|
Fabrication
Angle-24
Angle-24 can be fabricated using Angle Indexer. Drill 1+1 holes on each end (4 in total) in each angle-24.
Assembly
Tools
The following tools are recommended to assemble XY plotter (list may be incomplete):
- Hex or Allen keys (imperial from 1/16" to 1/8")
- Combination wrench (imperial 3/8" and 7/16")
- Hex socket (imperial 3/8")
- Needle nose pliers
- Screwdriver (phillips)
- Small screwdriver (flat)
- Try square or equivalent tool
- Measuring tape
Assembly Instructions
TBD