Structural Kit
Description
This kit includes various lengths of perforated angle, from 1" to 18", as well as 10-24 screws and nuts. This is a foundation kit used for building static contraptions, such as machine or robot frame, holding fixture, test stand etc.
Used in
Before you buy
- Contraptor set is in beta.
- The set uses imperial measurement system (inches). Consider availability of imperial parts, including fasteners, in your locale before ordering. Contraptor uses 6-32, 10-24 and ¼-20 threads.
- The set uses holes that are intentionally oversize (1/4”) for corresponding screws (10-24, <3/16” dia). This allows lower part tolerances which means ability to make replacement parts without precision tools and lower part cost.
- While components work as intended in most cases, they have not been tested in variety of conditions (vibration, temperature, dust/dirt, overloading, long operation time, or their combination). Do not use the set or machines assembled from the set in mission-critical applications.
Part list
| qty | part | source |
|---|---|---|
| 8 | angle-1 | fabricated |
| 16 | angle-2 | fabricated |
| 12 | angle-3 | fabricated |
| 12 | angle-4 | fabricated |
| 8 | angle-6 | fabricated |
| 6 | angle-9 | fabricated |
| 6 | angle-12 | fabricated |
| 6 | angle-18 | fabricated |
| 100 | nut 10-24 | http://www.mcmaster.com/#90480A011 |
| 100 | screw 10-24 1/2" | http://www.mcmaster.com/#92949A242 |